Velodyne SC-602 Amplifier - Manual (Page 20)

www.velodyne.com 14 - SC-602 Amplifier User’s Manual
RESTORING dEFAULTS
There is a feature that allows you to restore default settings for your SC-1250. By pressing presets in EXACTLY
the following order on the remote, the unit’s power light will blink indicating that you have restored defaults.
1. Movies
2. R&B – Rock
3. Jazz – Classical
4. Games
5. Games
6. Jazz – Classical
7. R&B – Rock
8. Movies
When you press the presets in the above order, the numeric led will display “P3” indicating that you have
restored defaults. The unit’s volume is reset to level 30 out of 80.
CARE OF yOUR AMPLIFIER ANd SUBWOOFER
do not use any harsh detergents or chemicals to clean the SC-602 chassis. Abrasives, detergents, or cleaning
solutions will damage the finish on the SC-602 chassis. We recommend using a damp cloth to clean the front,
back and sides. do not allow any liquids to enter the SC-602 chassis.
During normal conditions, the amplifier may be left on continuously without any problems. If you plan to leave
the unit unused for an extended period of time, we recommend that you turn off the unit by the master power
switch on the rear panel.