Velodyne SC-602 Amplifier - Manual (Page 22)

www.velodyne.com 16 - SC-602 Amplifier User’s Manual
SPECIFICATIONS
Specification SC-602 Subwoofer Amplifier
Amplifieer (Class D) 400 watts Dymamic, 200 watts RMS Power
High Pass Crossover 80 Hz (6 dB/octave)
Low-Pass Crossover 30Hz-160Hz, Defeatable, 24 dB/octave slope
Input Line and speaker-level
Outputs Line-level throughput, speaker level: 80 Hz up, (subwoofer out)
Phase 0°, 90°, 180°, 270°
Dimensiona 3.6” x 17” x 13” (9 x 43.3 x 33 cm)
** Allow two extra inches in depth for wire connectors and power cables
** Includes feet. Feet can be removed for rack mount use. Unit is approximately “two rack units” high.
Warranty Three years (electronics, parts and labor)
Shipping Weight (approx.) 25 lbs. (22.7 Kg)
The following subwoofers are designed to work with the SC-602 amplifier:
Specifications SC-600 IW (In-Wall) SC-600 IF/IC (In-Floor/In-Ceiling)
Woofer Two 6.5” active drivers, Two 12.5” x 3” passive radiators 12” (9.7” piston diameter) subwoofer
Frequency Response:
Overall (+/-3 dB) 37-120Hz, 23-250 Hz, 34-180 Hz 25-120Hz, 15-200 Hz, 24.9-120 Hz
Harmonic Distortion <5% (typical) <5% (typical)
Magnet Structure 64 oz (4 lbs) each active / 128 oz (8 lbs) total 56 oz. (3.5 lbs.)
Voice Coil 2” 4 layer copper coil 2.5” 4 layer copper coil
Dimensions (H/W/D):
(inc. feet & grill) 18.6” x 16.5” x 4.3” (47.2 x 42 x 11 cm)
**excludes grilles, mounting tabs, etc.
9” x 14” x 32” (23 x 35.6 x 81.3 cm)
**Allow 1-2 extra inches in depth for wire
Cabinet Passive radiator design Slotted bass reflex enclosure
Warranty (North America) Five years (drivers - parts and labor) Five years (drivers - parts and labor)
Shipping weight (approx) 22 lbs. (9 Kg) 40 lbs. (18 Kg)