Vortech Ford SVT Contour/Mercury 2.5L V6 Cougar - Manual (Page 21)

P/N: 4FS020-010
©2002 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
11JAN02 V2.0 (Cougar (4FS V2.0))
Fig. 11-e
11. MAIN BRACKET ASSEMBLY, cont’d.
Fig. 11-f
VO
R
TE
CH IDLER
1.926” SPACER AGAINST ENGINE COVER (REMOVE
FACTORY BOLT) INSTALL M8 x 100 BOLT AND WASHER
REMOVE FACTORY NUT AND INSTALL 1.735 LONG THREADED
HEX SPACER AGAINST POWER STEERING BRACKET
(INSTALLED BEFORE IDLER PLATE IS ATTACHED)
1.490 LONG THREADED HEX SPACER BETWEEN IDLER
MOUNTING PLATE AND BEARING PLATE
0.481 SPACER AGAINST ENGINE COVER (REMOVE FACTORY BOLT)
INSTALL M8 x 55
BOLT w/WASHER
FIRST INSTALL
M8 x 75 STUDS
INTO BLOCK
(REMOVE
FACTORY BOLTS)
M8 x 25 BOLTS AND WASHERS
THRU TO HEX SPACERS
Ø7/16 NUT AND WASHER (INSTALLED
BEFORE PLATE IS ATTACHED TO ENGINE)
IDLER PULLEY AND .509 THICK IDLER
SPACER BEHIND MOUNTING PLATE
ALT.
CRANK
POWER
STEERING
IDLER
AIR
COND.
TENSIONER
S/C
7/16 x 2 BOLT
DUST SHIELD IDLER PLATE
.509 IDLER SPACER M8 x 25 BOLT AND
WASHER (3 PLACES)
7/16 NUT AND
WASHER
M8 x 100 BOLT AND
WASHER
SUPPLIED IDLER
PULLEY
LOWER SPACER
(1.926")
THREADED HEX SPACER
(3 PLACES)
ENGINE
TIMING
COVER
IDLER PLATE ASSEMBLY (SIDE VIEW)
13