Vortech 1986-1993 Ford 5.0L Mustang - Manual (Page 9)

3. Inlet Elbow Modification
A. Carefully mark the inlet elbow as shown.
B. Drill a 7/16” hole in the specified location, tap
1/4” NPT and install the 1/4” NPT x 5/8” barb
x 90
°.
C. Orient the fitting as shown to approximately
the one o’clock position.
4
2.600
© 1997, 2000 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
24JAN00 V 1.0