Vortech 8-Rib Drive Upgrade for 2000-2004 Mustang GT - Manual (Page 11)

5
P/N: 007043
© 2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured.
(007043v1.1)00-04MusGT
4. FINAL CHECK
A. Check all fittings, hose and clamps for tightness
and leaks. Make sure all wires and lines are prop-
erly secure with clamps or tie-wraps.
B. Make sure all wires and hoses are routed away
from hot, moving or sharp objects.
C. Double check to ensure water is flowing through
the CAC system. (If equipped.)
D. Test drive the vehicle.
E. Always listen carefully for engine detonation.
Discontinue heavy throttle usage if detonation is
heard.
WARNING: Do not attempt to operate the vehi-
cle until ALL components are
installed and ALL operations are com-
pleted including the final check.
• Custom ECM programming and fuel / igni-
tion system upgrades will be required
when changing the supercharger drive
pulley to any size other than what was
originally supplied in the complete super-
charger kit.
• A Vortech Maxflow Race or Mondo com-
pressor bypass valve is requires for applic-
aitons producing more than 11-12 psig.