Woodhaven 7600-7603: Dovetail Jigs - Manual (Page 6)

Assembled
Drawer
Components
Side should be inset 1/64”
or less from end of Face.
Part Marking
Suggestion:
Mark mating ends with
numbers so you know
which parts need to
be done as pairs.
Drawer Side:
Inside Face
Drawer Side:
Inside Face
Drawer Back:
Inside Face
Cut 1/32” longer then
desired fi nished length.
Drawer Front: Inside Face
Cut 1/32” longer then desired fi nished length.
Rabbeted Drawer
Front: Inside Face
Assembled
Drawer
Components
Side should be inset 1/64”
or less from end of Face or less from end of Face.
Part Marking
Suggestion:
Mark mating ends with
numbers so you know
which parts need to
be done as pairs.
Drawer Side:
Inside Face
Drawer Side:
Inside Face
Drawer Back:
Inside Face
Cut 1/32” longer then
desired fi nished length.
Drawer Front: Inside Face
Cut 1/32” longer then desired fi nished length.
Rabbeted Drawer
Front: Inside Face
C3 C2
D3
D4
B2
B1
A1 A4 A1 A4
10