DCS SW 6000 - Manual (Page 19)

Danish Interpretation Systems Installation Manual
Manual 01 19 60011 19
Software Installation
‘One PC’ Installation
The following installation procedure describes how to install the SW 6000 Software on a PC in a design as
described in the section ‘One PC System Design’.
Installing Prerequisites
1 Insert the CD with the ‘SW 6000
Version 5.3’ Software in the CD-ROM
drive in the PC
IMPORTANT:
If the software is downloaded from the
DIS web site the folder ‘SW 6000
Installation’ must be copied to C:\ before
the installation is started and the
installation must be started from the
copied folder (C:\SW 6000 Installation)
Click on the Setup.exe in the ‘SW6000
v5.3.xx\ SW 6000 Installation’ folder on
the CD.
‘The install Shield Wizard’ will
automatically show a list of
‘Prerequisites’ required for running SW
6000.
Click ‘Install’ for all required applications
Installing SW 6000
After installing the ‘Prerequisites’, the installation wizard continues by installing the SW 6000 Applications