DCS SW 6000 - Manual (Page 5)

Danish Interpretation Systems Installation Manual
Manual 01 19 60011 5
Preparations and Requirements
Minimum requirement
The minimum requirements for a PC running an application are:
•
Min. Pentium 1.5GHz
•
Min. 2 GB RAM
•
Min. 10GB HD
•
CD-ROM drive
•
RS232 port (on the PC running the CUI application) or USB/RS232 adapter connected to an USB port
•
USB port if CP 6000 Chip Card Programmer is to be used
•
T-base 10 network card
•
VGA screen, min. resolution 1024x768. The CUA and CDA are designed for a resolution of
1024x768. If the VGA screen has a resolution higher than this, the applications will run in a
window.
Compatibility
The SW 6000 Software version 5.3.xx is only compatible with DCS 6000 Firmware Release 6.7 and
higher.
If the DCS 6000 system is an earlier release, an upgrade of the system is needed. Please consult your
Distributor for information about updating your system.
SW 6000 CD-ROM & Web-site
The SW 6000 Software Applications is located on the SW 6000 CD-ROM. On the CD you will also find the
needed additional application like the database.
As an alternative the software can be downloaded from www.dis.cc after login in as a Dealer or Distributor.
All manuals as well as sample geographic layouts are also on the CD.
User Manuals
The use of the applications is found in the following manuals:
CAA Conference Administration Application
User manual
CUA Conference User Application
User manual
ECU External Control Application
User manual
CDA Conference Display Application
User manual