DCS SW 6000 - Manual (Page 26)

Danish Interpretation Systems Installation Manual
Manual 01 19 60011 26
10 Select ‘SW 6000-1’ as the database to be
installed.
INFO: The SW 6000 system can handle up to 4
databases in each database engine. The names of the
databases are limited to ‘SW6000-1’, ‘SW6000-2’,
‘SW6000-3’, and ‘SW6000-4’.
For most installations only the SW6000-1 database is
needed.
IMPORTANT: Remember the name of the
database(s) selected as well as the name of the
computer as this information is needed when
installing the SW 6000 Software on other PCs
11 Click Test
This test shall pass indicating that the SW 6000
Database(s) are installed on an installed SQL
Server.
Click ‘OK’ if test passes
If the test does not pass then the Name of the
computer might be wrong.
Click ‘Next’
12 Set Database Connection and Hall Definitions
page.
Here you will have an option to select the
database engine.
By default the MSDE./SQL Server Express
option is selected.
The ‘Create Hall Definitions’ checkbox must be
checked if the option to connect to multiple
databases shall be configured.
Details on hall definition settings are present in
the ‘Creating Multiple Hall Definitions’ section.
Click ‘Next’ to continue.