DCS SW 6000 - Manual (Page 21)

Danish Interpretation Systems Installation Manual
Manual 01 19 60011 21
8 The installation gives two choices:
‘One PC’ installation and ‘Advanced
Installation’.
Select ‘One PC’ and click ‘Next’
The ‘CAA’, ‘CUI’, ‘CUA’ and ‘SW 6000’
will then be installed.
The applications will start-up
automatically.
9 Select the COM port where the CU is
connected to the PC (CUI COM Port).
The available COM ports are shown as
well.
Please note, that the name of the
database is ‘SW6000-1’.
If another default language than English
is required, then please make a
selection. The default language can
only be selected during installation.
Click ‘Next’