XAIRCRAFT X650 Value - Manual (Page 15)

折叠状态
Unfolded
展开状态
Folded
F2 - F3010
挂载固定件
Load Hanger
F1 - F3005C
电池板
Battery Mounting Plate
电池
Battery
F1 - L1010
扎带
Fastener
步骤1 Step1
先扣入一边的挂载杆，扣入时注意用力，
以免损坏挂载固定件。
Assemble one side of hanger.
DO NOT OVER-EXERT TO AVOID
DAMAGE.
步骤2 Step2
使挂载固定件形变，并将其压入挂载杆。
注意用力避免损坏挂载固定件。
Assemble the other side of hanger as
shown in the figure.
DO NOT OVER-EXERT TO AVOID
DAMAGE.
机身盖安装 Frame Cover Assembly 电池挂载架安装 Assembly Battery Mounting
13
折叠或展开机架时，应先将机身盖取下，待折叠或
展开后再将机身盖装回。
Before folding or unfolding, please unload
the frame cover.
After folded or unfolded, assemble the frame
cover. 飞行时必须安装机身盖，以防机身杆移位
发生危险。
Frame cover must be assembled to
avoid DAMAGE in flight.
施力点
Force Point
M - M3001 ×8
M2.5×6 圆头内六角螺丝
M2.5×6 Socket Screw
F3007
机身盖
Frame Cover
电池安装
Battery Installation
方向识别贴纸
Heading Paster
前方两条机身臂贴上方向识别贴纸。
Stick the heading paster on two frame
arms which is front.
螺旋桨安装在第15页
Propeller Assembly is in the
page 15.
www.xaircraft.com