Lash, Imer, Orward – Xblue Networks X16 User Manual

Page 28

Advertising
background image

X16 Installation Guide

- 28 -

Issue 2

Fe

atu

re

De

sc

rip

tio

n

Flash

The flash command (

Feature +

) is used to invoke features on telephone lines

such as call waiting and three-way calling. The Flash command may be
programmed on one of the programmable buttons.

Flash Timer

This adjustable timer is used to compensate for telephone network variations.

Forward

Calls can be forwarded to one of three destinations; voice mail, external number
(EXT) or trunk to trunk (TRK2TRK). Calls transferred to an extension that is

forwarded, will only forward after the “Waiting Time” has expired. At default the
Waiting Time is set to 10 seconds. Use the “Phone Programming” area to

program this parameter.

Voice mail

– At default all extensions are forwarded to voice mail, and the center

navigation button will be illuminated (lit solid); no other visual indication will be

given. After the expiration of the Waiting Time, the call will be diverted
(redirected) to the extension‟s Outgoing Message (OGM).

TRK2TRK

– When an extension is forwarded to an external number the system

will send a command to the telephone network line, known as a “Flash”, which

begins the transfer. The telephone system will then dial the preprogrammed
digits, pause until the call is established, and then hang up, releasing the call

from the system. TRK2TRK FWD will appear in the display, use the right
navigation button to clear this from the display.

Note:

This feature may require a special service from the telephone company central office

called, “Three-way calling with call disconnect”. Please consult with your telephone

company for information regarding this feature. This type of forwarding may result in a

usage and toll charge for each forwarded call. Any and all toll charges are the sole

responsibility of the user of the installed equipment; XBLUE offers no warranty or will

assume any responsibility for any toll charges.

External

– External Call forwarding uses two telephone system lines.

1) This feature occupies two CO Lines. Therefore, if a second CO Line

is not available, the call will not forward. Also, a slight volume
decrease is normal.

Advertising