Xblue Networks X16 - Manual (Page 48)

X16 Installation Guide
- 48 - Issue 2
Sy
ste
m
S
etu
p
Music Source – The system comes with an
internal music on hold source, or can be
connected to an external music on hold source
such as a CD or MP3 player.
CO MSGW – If this parameter is set to “On” and
a Network (Telephone Company) voice mail
system with Message Waiting Indication (MWI)
is being used, then the display will show what
lines have a new voice mail message. On the
second line of the display it will show:
CO MSGW: 12 4 6 – for lines 1, 2, 4 and 6.
Clear CO MSGW – This will erase (clear) all of
the Message Waiting Indication (MWI) left by
the Network (Telephone Company) voicemail
system.
Area Codes – There are a total of 6 area codes
that can be entered into the area code
parameter.
The first is the Home Area Code. This is the
area code of the physical location of the system.
When Caller ID is received, the 3 digits entered
into the “Home Area Code” will not be displayed
or redialed.
The next five “Local Area” codes are used if the
calling area requires ten (10) digit dialing. When
Caller ID matches an entry, the number will be
displayed and redialed with only 10 digits.
When Caller ID does not match an entry in
either the Home Area code or the local area
codes, the system will display and redial the
number with 11 digits.
AUTO MUTE Music Source
=External
AUTO MUTE CO MSGW
=Off
AUTO MUTE Clear CO MSGW
=No?
AUTO MUTE Area Codes
Home Area Code
Local Area C1
Local Area C2
Local Area C3
Local Area C4
Local Area C5