Toro ECXTRA INDOOR - Manual (Page 5)

Timer Components
The following are brief descriptions of the timer
components and display elements. Each of these items
will be explained in further detail within the appropriate
programming, operating and installation sections of
this guide.
1 - LCD Display
A - “Start Time” symbol is displayed when setting the
program start times.
B - Program start time identification numbers 1–4.
C - Main display of various time values and prompts.
D - Program A, B and C identifiers.
E - “Watering On” symbol is displayed when a
watering zone is running. Symbol blinks when
watering is paused.
F - “Watering Off” symbol is displayed when the
Rain Delay feature is active.
G - “Percent” symbol is displayed when the Season
Adjust feature is in use.
H - Watering zone identification numbers.
I - Day-of-the-week identifiers.
J - “Run Time” symbol is displayed when setting the
watering zone run times.
2 - Control Buttons
+/
on
button – Increases the time display, scrolls
forward through the program information and selects
watering days.
–/
off
button – Decreases the time display, scrolls
backward through the program information and
removes watering days.
next
button – Advances to the next portion of
program information. Resumes watering if paused.
Advances through stations manually when watering.
manual start
button – Selects and starts manual
watering operations.
3 - Control Dial – Selects all controller programming
and operation controls (except Manual Start).
Control Dial Positions
run
– The normal dial position for all automatic
and manual operations.
current time
/
day
– Enables the clock time and
day to be set.
watering days
– Enables the watering day
schedules to be set and reviewed.
start times
– Enables the program start times to
be set and reviewed.
set zone times
– Enables the watering zone run
time to be set and reviewed.
(continued)