Fluke 189 - Manual (Page 73)

Changing the Default Settings
Selecting Setup Options
5
5-3
Table 5-2. Common Setup Selections
Selection Option Choices Factory Default
bEEP
Beeper
yE5
or
no
(flashing) Use < > to select.
yE5
8888 Display digits 8888 (4) or 88888 (5) Use < > to select. 88888
bLoFF Backlight time out MM:SS - Use
q
to increment or decrement minute or
second values.
Use < > to select minutes or seconds. Selected values
flash. Setting value to 00:00 disables timeout.
15:00
Pr0FF
Power off time out HH:MM - Use
q
to increment or decrement hour or minute
values.
Use < > to select hours or minutes. Selected values flash.
00:15
Hour
24-hour clock HH:MM - Use
q
to increment or decrement hour or minute
values.
Use < > to select hours or minutes. Selected values flash.
00:00
50-60
Line/Main frequency
60
or
50
(flashing) - Use < > to select.
60
Fcty Restore factory defaults yE5 or no (flashing) - Use < > to select. no