DSC POWERSERIES PC1616 User Manual
Page 23
19
• Write the fire escape plan down and rehearse it frequently so that should an emergency arise,
everyone will know what to do. Revise the plan as conditions change, such as the number of
people in the home, or if there are changes to the building’s construction.
• Make sure your fire warning system is operational by conducting weekly tests. If you are
unsure about system operation, contact your installer.
• We recommend that you contact your local fire department and request further information
on fire safety and escape planning. If available, have your local fire prevention officer conduct
an in-house fire safety inspection.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and/or injury, observe the following:
•
Do not spill any type of liquid on the equipment.
•
Do not attempt to service this product yourself. Opening or removing the cover may expose you to
dangerous voltage or other risk. Refer servicing to qualified service personnel. Never open the
device yourself.
•
Do not touch the equipment and its connected cables during an electrical storm; there may be a
risk of electric shock from lightning.
•
Do not use the Alarm System to report a gas leak if the system is near a leak.
REGULAR MAINTENANCE AND TROUBLESHOOTING
Keep your Alarm Controller in optimal condition by following all the instructions that are included
within this manual and/or marked on the product.
CLEANING
•
Clean the units by wiping with a damp cloth only.
•
Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter through
holes in the Alarm Controller and cause damage.
•
Do not use any water or any other liquid.
•
Do not wipe the front cover with alcohol.
TROUBLESHOOTING
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this happens,
your Alarm Controller will identify the problem and displays an error message. Refer to the provided
list when you see an error message on the display. If additional help is required, contact your
distributor for service.
WARNING:
This equipment, PC1616/1832/1864 Alarm System shall be installed and used within
an environment that provides the pollution degree max 2 and over-voltages category II non-
hazardous locations, indoor only. It is designed to be installed, serviced and/or repaired by service
persons only [service person is defined as a person having the appropriate technical training and
experience necessary to be aware of hazards to which that person may be exposed in performing a
task and of measures to minimize the risks to that person or other persons]. For EU and Australian
markets, the equipment is permanently connected; an accessible disconnect device shall be
incorporated into the building installation wiring. For North America the equipment is a direct plug-in
connection; the socket outlet shall be installed near the PC1616/1832/1864 and shall be easily
accessible. The plug of the direct plug-in transformer serves as the disconnect device.
NOTE:
There are no parts replaceable by the end-user within this equipment, except for the keypad
batteries.
This publication covers the following models:
•
PC1555RKZ
RFK5501
•
PK5508
PK5500
•
PK5516
PK5501
•
RFK5500
LED5511
•
RFK5508
LCD5511
•
RFK5516