Pontiac 2009 Torrent - Manual (Page 135)

Setting Cruise Control
{ CAUTION:
If you leave your cruise control on when you are
not using cruise, you might hit a button and go into
cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
The cruise control buttons
are located on the steering
wheel.
I (On/Off): Press I to turn the cruise control
system on and off.
RES+ (Resume): Press to resume a set speed and to
accelerate the speed.
SET
−
(Set): Press to set a speed and to decrease
the speed.
[ CANCEL: Press to cancel cruise control.
To set a speed do the following:
1. Press I to turn cruise control on. The indicator
light on the button comes on.
2. Get up to the desired speed.
3. Press the SET
−
and release it. This instrument
panel cluster light J comes on after the system
is engaged.
4. Take your foot off the accelerator pedal.
Resuming a Set Speed
If the cruise control is at a set speed and the
brakes are applied, this disengages the cruise control.
The instrument panel cluster light
J also goes out,
indicating cruise is no longer engaged. To return to
the previously set speed, it does not need to be reset.
Once the vehicle is at a speed of about 25 mph
(40 km/h) or more, briefly press RES+. The vehicle
goes back to the previous set speed and stays there.
3-11