Headlamp aiming, Headlamp aiming -50 – Pontiac 2006 Grand Prix User Manual

Page 356

Advertising
background image

Notice: If the jumper cables are connected or
removed in the wrong order, electrical shorting may
occur and damage the vehicle. The repairs would
not be covered by your warranty. Always connect
and remove the jumper cables in the correct
order, making sure that the cables do not touch
each other or other metal.

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (

) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (

) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles, do
the following:

1. Disconnect the black negative (

) cable from the

vehicle that had the dead battery.

2. Disconnect the black negative (

) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the remote positive (+) terminal cover to its

original position.

Headlamp Aiming

The vehicle has a visual optical headlamp aiming
system. The aim has been preset at the factory and
should need no further adjustment.

However, If the vehicle is damaged in an accident, the
headlamp aim may be affected and adjustment may
be necessary.

If oncoming vehicles flash their high beams at you, this
may also mean the vertical aim needs to be adjusted.

Jumper Cable Removal

5-50

Advertising