Pontiac 2006 Grand Prix - Manual (Page 79)

The following functions may be available with your
vehicle’s remote keyless entry system:
/
(Remote Vehicle Start): If your vehicle has this
feature, the engine may be started from outside
the vehicle using the remote keyless entry transmitter.
See “Remote Vehicle Start” later in this section for more
detailed information.
Q
(Lock): Press the lock button to lock all the doors.
If enabled through the Driver Information Center
(DIC), the parking lamps may flash once and the horn
may chirp once to indicate locking has occurred.
See “REMOTE LOCKS FEEDBACK” under DIC Controls
and Displays (Base Level DIC) on page 3-52 or DIC
Controls and Displays (Uplevel DIC with Trip Computer)
on page 3-60 for programming information. Pressing
the lock button will arm the content theft-deterrent
system. See Content Theft-Deterrent on page 2-17 for
more information.
"
(Unlock): Press the unlock button one time to unlock
the driver’s door. Press the unlock button again within
five seconds to unlock the other doors. The interior
lamps will come on and stay on for 20 seconds or until
the ignition is turned on. If enabled through the DIC,
the parking lamps may flash once and the horn
may chirp once to indicate unlocking has occurred. See
“REMOTE LOCKS FEEDBACK” under DIC Controls
and Displays (Base Level DIC) on page 3-52 or
DIC Controls and Displays (Uplevel DIC with Trip
Computer) on page 3-60. Pressing the unlock button on
the remote keyless entry transmitter will disarm the
content theft-deterrent system. See Content
Theft-Deterrent on page 2-17 for more details.
V
(Trunk Release): Press this button to release the
trunk lid. The transaxle must be in PARK (P) for this
feature to operate.
L
(Panic Alarm): Press this button to activate the
alarm. The ignition must be in OFF for the remote alarm
to work. When the remote alarm button is pressed
the headlamps will flash and the horn will sound
repeatedly for two minutes. The alarm will turn off when
the ignition is moved to RUN or the remote alarm
button is pressed again.
2-5