Datalogic Scanning DL Cordless Card DLCC - Manual (Page 29)

PARAMETER ISSUES AND DEFINITIONS
4
4 PARAMETER ISSUES AND DEFINITIONS
4.1 RADIO AND SERIAL COMMUNICATION CONTROLS
DLCC communication can be controlled by several parameters depending on
whether it is a Client or Server. DLCC can act as both Client and Server.
The following table summarizes which parameters are controlled by the Client and
which ones are controlled by the Server.
Client (Transmitter)
controlled parameters:
Server (Receiver)
controlled parameters
Transmission Mode ACK/NACK Protocol
ACK/NACK From Remote Host Handshaking
FIFO
Handshaking
Single Store
NOTE
To avoid incorrect interpretation of ACK characters, ACK/NACK
Protocol and ACK/NACK From Remote Host cannot be
simultaneously enabled on the same DLCC.
To help understand the various communication control possibilities among the
different communication modes, we will analyze the communication control
parameter settings for the following 3 cases:
1) DLCC acting as Server
2) DLCC acting as Client (like an RF device)
3) DLCC as client / server
15