Dimplex DF3015 - Manual (Page 11)

PURIFIRE™
The Purifire™ includes a high efficiency filter to help improve the quality of air.
1. Press the button for the Purifire™ function.
2. Press the “Purifire Low Speed” button or the “Purifire High Speed” button to select
LOW or HIGH.
3. Press the button to turn the Purifire™ ON, press the button to turn the Purifire™
OFF.
SLEEP TIMER
The Sleep Timer automatically shuts off the fireplace after a preset time (from 30 minutes to 8
hours).
1. Press the Flame/Heat On/Off button to turn the fireplace ON.
2. To set the sleep timer press the “Sleep Timer Up” button.
3. Set the timer from 30 minutes through 8 hours.
4.
5. The fireplace will automatically turn OFF when the sleep timer reaches 0 minutes.
6. The sleep timer can be cancelled at any time by pressing the “Sleep Timer Down”
button repeatedly until the sleep timer displays “0”.
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electric shock or damage to persons.
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity
and detail of the log ember bed exterior disappears. There are four bulbs under the log set,
which generate the flames and embers, and two bulbs above the log that illuminate the log
exterior.
LOWER LIGHT BULB REQUIREMENTS
Quantity of 3 clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 watt
rating. Example: GE 60BC or Philips 60 CTC.
DO NOT EXCEED 60 WATTS PER BULB
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated
life. Group replacement will reduce the number of times you need to open the unit to replace
light bulbs. Care must be taken when removing the logset as the logset contains LED’s and
wires.
9