Preparing for operation, 2 connection, 6commissioning – Pilz PNOZ mml1p User Manual
Page 22: 2 preparing for operation
6.2
Preparing for operation
6
Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-2
6.2
Preparing for operation
6200
Preparing for operation
6-
6.2.1
Download modified project to the PNOZmulti safety system
Download modified project to the PNOZmulti safety system
6-
Verdrahtung_multi_Modul_Betr_geaend_Projekt_BA
As soon as an additional expansion module has been connected to the
system, the project must be amended using the PNOZmulti Configura-
tor. Proceed as described in the operating instructions for the base unit.
6.2.2
Connection
Connection
6-
Schnittstellenbelegung_8-polig_mml1p
Betriebsbereitschaft herstellen Anschluss PNOZ mml1p
Supply voltage
NOTICE
For the commissioning and after every program change, you
must check whether the safety devices are functioning correctly.
RJ45 socket
8-pin
PIN
Layout
1
CA+
2
CA-
3
CB+
4
n.c.
5
n.c.
6
CB-
7
n.c.
8
n.c.
Shield
CGround
Supply voltage
AC
DC
8 1
24V
+ 24 V DC
0 V
24V
0V
0V