Pilz PNOZ msi12p Rockwell 15/15 2,5m - Manual (Page 3)

PNOZ msi12p
Operating Manual PNOZ msi12p
21534-EN-05
3
Description
The connection cable serves to connect an incremental encoder to the PNOZ ms2p,
PNOZ ms3p, PNOZ ms4p or PNOZ s30 speed monitors.
The contacts of connectors X1 and X2 are connected and have the same configuration.
The signals that are relevant for the speed monitor are utilised in parallel and available by
way of the RJ-45-connector. These signals occupy the following pins of terminals X1 and
X2:
Signal Pin No.
A 1
/A 2
B 3
/B 4
Vcc nc
GND 6
X3
X1
X2
H
L
B
T
Pin 1
Pin 1