Pilz PSSnet SHL 8T MRP - Manual (Page 129)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
129
4.6.10 monitor session <session-id> source/
destination
This command allows you to configure and activate the port mirroring func-
tion of the switch. Port mirroring is when the data traffic of a source port is
copied to a specified destination port. The data traffic at the source port is not
influenced by port mirroring. A management tool connected at the specified
port, e.g., an RMON probe, can thus monitor the data traffic of the source
port.
Note: In active port mirroring, the specified destination port is used solely for
observation purposes.
Default
none
Format
monitor session {source | destination} interface
<slot/port>
Mode
Global Config