Pilz PSSnet SHL 8T MRP - Manual (Page 208)

208
4.8 System Utilities
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.8.17 copy
This command uploads and downloads to/from the switch. Remote URLs
can be specified using tftp. A list of valid commands is provided below.
The command can be used to the save the running configuration to nvram by
specifying the source as system:running-config and the destination as
nvram:startup-config.
Default
none
Format
copy
copy nvram:errorlog <url>
copy nvram:log <url>
copy nvram:startup-config <url>
copy nvram:startup-config system:running-config
copy nvram:traplog <url>
copy system:running-config nvram:startup-config
copy system:running-config <url>
copy <url> nvram:sshkey-rsa1
copy <url> nvram:startup-config
copy <url> system:image
copy <url> system:running-config
copy <url> system:bootcode.Mode
Privileged EXEC