Pilz PSSnet SHL 8T MRP - Manual (Page 142)

142
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.27 set igmp query-ports-to-filter
This command enables or disables the addition of query ports to multicast fil-
ter portmasks. The setting can be enable or disable.
Default
Disable
Format
set igmp query-ports-to-filter {enable | disable}
Mode
Global Config
enable
Addition of query ports to multicast filter portmasks.
disable
No addition of query ports to multicast filter portmasks.