Pilz PSSnet SHL 8T MRP - Manual (Page 196)

196
4.7 User Account Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.7.10 users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login
user. The valid authentication protocols are
none , md5 or sha . If md5 or sha are
specified, the user login password is also used as the snmpv3 authentication
password and therefore must be at least eight characters in length. The
<username> is the login user name associated with the authentication pro-
tocol.
Default
no authentication
Format
users snmpv3 authentication <username> <none | md5
| sha>
Mode
Global Config
U no users snmpv3 authentication
This command sets the authentication protocol to be used for the speci-
fied login user to none. The <username> is the login user name for
which the specified authentication protocol will be used.
Format
users snmpv3 authentication <username>
Mode
Global Config