Nexen LSCC-44 923632 User Manual
Page 10
FORM NO. L-21099-G-1209
10
Figure 8
2
15
4
4
4
19
5
5
R
eassembly
refer to Figures 3 -8.
19. Support the inner race of the pilot Bearing (Item 6)
and press the Hub into the Pilot (Item 1). Reinstall
the retaining rings.
20. Reinstall all of Friction Facings (Item 4), Friction Plates
(Item 5), Springs (Item 19) and Washers (Item 20).
21. Set the Pilot/Hug assembly on the Arbor Press and
place the Air Chamber/Piston assembly on top of the
Hub.
22. Holding the Air Chamber (Item 3) and the hollow shaft
on top of the hub, press Air Chamber back onto the
unit.
23. Insert the Retaining Ring (Item 14) onto the Hub (Item
1).
24. Verify the unit is functional by applying air to the unit
and watching it engage and disengage.
Figure 7
6
2
15
7
MaInTenanCe (continued)
rePaIr KITS
MODeL
LSCC-32
LSCC-44
LSCC-54
FaCInG KIT
923560
923552
923578
rePaIr KIT
923559
923551
923577