Nexen DPB-09T 960003 - Manual (Page 11)

FORM NO. L-20094-D-0210 11
FIGURE 7
21
5
36
Q.D. Bushing
16
35
27
25
26
Pull-up
Bolts
REPLACEMENT PARTS
The item or balloon number for all Nexen products is used
for part identification on all product parts lists, product
price lists, unit assembly drawings, bills of materials, and
instruction manuals. When ordering replacement parts, specify model designation,
item number, part description, and quantity. Purchase
replacement parts through your local Nexen Distributor.
TORQUE ARM
FIGURE 8
37
42
43
38
39
41
45
40
44
ITEM DESCRIPTION QTY.
37 Arm, Torque 1
38 Bar, Extension 1
39 Bracket 1
40 Screw, Cap 1
41 Screw, Cap 1
42 Screw, Cap 3
43 1 Lock washer 3
44 1 Nut, Lock 1
45 Nut, Lock 1
1 Qty. 4: DPB-15T
14. Install Retaining Ring (Item 26).
15. Press Flanged Hub (Item 36) into Bearings (Item 25)
and Splined Hub (Item 35).
16. Install Retaining Ring (Item 27).
17. Reverse Steps 1 through 7 to reassemble DPB Brake,
noting chalk alignment marks, and tighten all screws to
recommended torque (See Table 2).
PARTS REPLACEMENT (continued)