Nexen FMBS-1375 801981 - Manual (Page 11)

11 FORM NO. L-21272-A-1212
REPLACEMENT PARTS LIST
The item or balloon number for all Nexen products is used
for part identification on all product parts lists, product
price lists, unit assembly drawings, bills of materials, and
instruction manuals. When ordering replacement parts, specify model
designation, item number, part description, and quantity.
Purchase replacement parts through your local Nexen
Distributor.
Facing Kit: One split Friction Facing and six Facing Screws
Repair Kit: Three Bearings, two O-Ring Seals, and Compression
Springs (see Table 4 for quantity).
Specify the model and kit product number when ordering facing
and repair kits (See Table 6).
1 Denotes repair kit items.
* See Table 4 for quantity.
TABLE 4
Model Product No. Qty
FMBS-1125 N/A N/A
FMBS-1375 801980 6
FMBS-1625 801990 10
Item 1
Item 5
Item 3
Item 4
Item 18
Item 19
Item 2
Item 12
Item 11
Item 10
FIGURE 8
Item 13
Item 15
Item 6
Item 14
Item 21
Item 20
Item 23
Item 22
Item 26 Item 27
Item 28
Item 25
TABLE 3
Item Description Qty
1 Shaft 1
2 Air Chamber 1
3 Piston 1
4 Disc Plate 1
5 Splined Disc 1
6 Input Housing 1
10 Bearing (Small) 2
11 Retaining Ring (Int.) 1
12 Retaining Ring (Ext.) 1
13 Bearing (Large) 1
14 Retaining Ring (Int.) 1
15 Retaining Ring (Ext.) 1
18 Friction Facing 1
Item Description Qty
19 Facing Screw 6
20 1 O-Ring Seal (Large) 1
21 1 O-Ring Seal (Small) 1
22 1 Compression Spring *
23 Dowel Pin 2
25 Socket Head Cap Screw 4
26 Hex Head Cap Screw 4
27 Lock Washer 4
28 Socket Head Cap Screw 2
31 Key 2
32 Lock Washer (Not Shown) 4
33 Socket Head Cap Screw (Not Shown) 4