Lenco Boost-8 - Manual (Page 7)

EN-6
4. Press PLAY/PAUSE button once to halt music playback, the elapsed time of the current track flashes
to indicate the player in pause mode; press STOP button to cease music playback, the LCD shows
the total number of the tracks and the total playing time.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
1. Press NEXT button once in music playback to skip to the next track. To skip to a specific track ahead,
press this button several times.
2. Press PREVIOUS button once to skip to the beginning of the current track, press the button twice
continuously to skip to the previous track. To skip to a specific track at back, press this button several
times.
3. Hold NEXT button in music playback to search forward at quick rate for a specific point to play.
4. Hold PREVIOUS button in music playback to search backward at quick rate for a specific point to
play.
REPEAT A SINGLE TRACK
To repeat a preferred track in playback, press REP button once, "TRK REPEAT" shows on the LCD.
Then select the preferred track using NEXT/PREVIOUS button. The unit will repeat the chosen track
until you press STOP button.
REPEAT ALL TRACKS
To repeat all tracks, press REP button twice in play mode, "REPEAT ALL" shows on the LCD. The
player will repeat all tracks until you press STOP button.
Press REP button again to cancel repeat playback and resume normal playback.
You can also press REP button in stop mode to select “TRK REPEAT” or “REPEAT ALL” and then
press PLAY/PAUSE button to start repeat playback.
RANDOM PLAY
Random play is that tracks on the disc are played by the unit at random. Press RAN button to enter this
mode during playback, "RANDOM" shows on the LCD. Tracks on the disc will be selected at random
for playback and the player stops automatically after all tracks are played.
MP3-CD PLAYBACK
1. Load an MP3 disc onto the unit following the instructions of "LOAD A DISC".
2. Press the FUNCTION button on the unit repeatedly or press CD button on the remote to switch the
unit to CD mode. "READING" shows on the screen to indicate the disc is being read.
3. After the MP3-CD is successfully read, playback begins from the first track of the first folder.
4. Press ID3 button to enable or disable the ID3 function. The LCD will show the corresponding
information of the current track at ID3 ON mode.
EXTERNAL MEMORY MEDIA OPERATION (USB/CARD)
1. Power on the unit.
2. Insert a USB data traveller into the USB port or Insert a card into the card slot; press FUNCTION
button on the unit repeatedly or press CARD button or USB button on the remote to switch the unit to
CARD or USB mode respectively.
3. After the inserted USB or card is successfully read, playback begins from the first track of the first
folder.
4. Press ID3 button to enable or disable the ID3 function. The LCD will show the corresponding
information of the current track at ID3 ON mode
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY (MP3/USB/CARD)
1. Press NEXT button once in music play to skip to the next track. To skip to a specific track ahead,
press this button several times.