Lenco BTS-110 - Manual (Page 5)

ON with flashing in once per 3 seconds, when it’s paired. (pairing need time will
depend on the difference type / brand of device be used)
 Now, you can start to music play on your Bluetooth device when the device is in paired
and show connected. (If not, select / tap the relate menu and choose “connect” to
connect the Bluetooth speaker manually. It’s depended on your Bluetooth device
version and designed function.)
Note:
In some circumstances, the Bluetooth connection may break / disconnected; such as some
strong interference, beyond the connection distance or object moving in between both
Bluetooth devices. However, most of devices can be reconnected in some seconds
automatically, but in experience some of device may need to reconnect it by using the
Bluetooth device’s list menu manually.
Besides, since there have many Bluetooth versions could be installed into difference
type/brand of PCs, and also connect methods will have differences. If you cannot connect
your Bluetooth devices, please install with updated Bluetooth driver into your PC or contact
your dealer’s help desk for enquiry.
F. Disconnected from paired device
 To disconnect with paired device and for better result, turn OFF the Bluetooth Speaker
by power OFF directly.
 Or, you can choose disconnect from the Bluetooth device’s list by the paired device,
however, most devices will go back to reconnection mode in seconds. Means the
Bluetooth Speaker will again reconnected with the paired device with in seconds
automatically. So, turn OFF the Bluetooth function from the paired device in this case if
you want.
 If the Bluetooth Speaker disconnected with paired device by turn Off the paired device,
or accidently disconnected with paired device and cannot reconnect it, then the
Bluetooth Speaker will generates a beep sound in every few seconds which can hear
from the Bluetooth Speaker for notify for action. Reconnect them manually or Power
OFF the Bluetooth Speaker if you want.
G. Return to Bluetooth searching mode for new device
Before does this, we recommended you to turn OFF the Bluetooth function from
previous paired device firstly to avoid unforeseen connection issue. Two methods for return
the Bluetooth Speaker’s to searching mode:
 Slide the power switch back to OFF position for few seconds and then slide it to ON
again when it is in disconnect mode and power ON mode. The Bluetooth mode
indicator will light blue with blinking again in half second once. It’s return into Bluetooth
searching mode again.