Lenco BTT-100 - Manual (Page 2)

1
Important safety instructions
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
When the mains plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable. To be completely disconnected the power input, the mains plug
of the apparatus or the appliance coupler shall be disconnected from the mains completely.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation should not
be impeded by covering the ventilation openings with items, such as newspapers, table-cloths,
curtains, etc.
The use of apparatus is in moderate climates.
Attention should be drawn to the environmental aspects of battery disposal.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Features & technical data
Power source:
AC 110~240V 50Hz/60Hz
Power consumption: 100W
Battery of remote control: CR2025 x 1
Tuning range: FM 87.5 -108 MHz
Output Power RMS At 10% THD: Around 25W x 2, Subwoofer 50W x 1
Bluetooth compatible: v. 2.1 + EDR, A2DP, AVRCP
Compatible with USB/SD card
Dimensions: 325(L) x 320(W) x 1261(H) mm
Operating Humidity Range: 10 % to 75 %
Operating temperature range: -5°C to +35°C
Specifications are subject to change without notice.