Lenco BTT-100 - Manual (Page 6)

5
again to resume the audio. During playback, press and hold STANDBY/MUTE button on the remote to
enter standby mode.
VOLUME LEVEL ADJUSTMENT
Press the VOLUME +/- button to adjust the volume output level.
TONE SETTING FOR THE UNIT
During playback, press the TONE button on the remote once, and use the VOLUME+/- button to adjust
the bass.
During playback, press the TONE button on the remote twice repeatedly, and use the VOLUME+/-
button to adjust the treble.
After adjusting the bass or treble effect, the unit will resume the previous display automatically.
Connection with other device
AUX IN
1. Connect the AUX in jacks on the unit to an audio source, for example, DVD player with an RCA
cable.
2. Power on the unit following the corresponding instructions.
3. Press the MODE button on the unit or the FUNCTION button on the remote repeatedly to switch to
AUX mode.
4. Use the native controls on the connected audio device to begin playing music through the connected
unit.