Lenco CR-3304 - Manual (Page 6)

FUNCTION
1 . Set to CD
CD
COMPACT DISC PLAYBACK
2. Lift the CD door up.
3. Insert a disc with the label
side facing up.
4. Close the CD door.
The disc will rotate and
the total tracks of the disc
will show on the display.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback,
and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
TO STOP PLAYBACK
Press the STOP button and the display shows the total
tracks of the disc.
gB 4
5. Press the Play / Pause button.
Track number " 01 " & the symbol " " & "CD" will
be shown.
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be flashed. Press the button again to resume playback.
THE RADIO
RADIO OPERATION
1 . PRESS THE POWER BUTTON TO TURN ON THE UNIT.
( TO TURN THE RADIO OFF , PRESS THE POWER BUTTON AgAIN. )
2 . SET THE FUNCTION SWITCH TO
SELECT THE FM ST. OR FM MONO.
3 . ADjUST THE TUNINg CONTROL TO SELECT
THE DESIRED RADIO STATION .
4 . ADjUST THE VOLUME CONTROL TO SET THE VOLUME TO THE DESIRED LEVEL .
CR3304 LENCO ENGLISH FM IM TCD056 6 30/5/2009 12:45:16