Lenco CS-460 - Manual (Page 7)

6
1.7 Description of Rear Cabinet
Note: 1. After connecting the Parking Line ,the video on the monitor of the front panel will be displayed only
when the hand brake is on.
2.Use the clip end of a Ground Line provided by manufacturer to connect the Fixing Screw Bolt, use
another end of the Ground Line to connect the negative pole of the power source. Otherwise, the
video on screen maybe flashing.
Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car
The Description of the Fixed ISO Female Connector
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna
6.
7. 12V (To Ignition Key)
8. GROUND
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)