Lenco DVL-1955 - Manual (Page 10)

8
v
Basic Operation
Power on/off
1. Connect to the power supply with the adaptor.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display the
input source menu, and use CH+/- button on the TV set or /\/v button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure
the connections are prepared.
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu: Picture Sound Channel Feature Setup
Submenu
(Picture menu
for example)
Hint---you should operate
the OSD menu according
to the hint.
Use /\ / v button to select the main menu, and press / OK button to enter the submenu.
In the submenu, use /\ / v button to select the function item, press / OK button to enter
the setup menu, then press / button to adjust, or press /\ / v
/ button to confirm.
* (Press MENU / button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
to select and press OK /
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of thebanner.