Lenco DVL-1955 - Manual (Page 19)

OSD Menu
17
5. SETUP menu
OK
OSD Timer: Lets you adjust the amount of time the On Screen Menu stays on the screen
before disappearing.
Auto SCART: The TV will be changed to SCART source automatically when you connect the
TV to the SCART device.
PC Setup: Change the PC Settings in PC mode.
Auto Adjust: Setup the parameter of the screen automatically.
H/V-Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a
stable image is obtained.
Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.
Blue Screen: Changes the background when there is no input between clear and a blue
background (Only available in some sources).
Home Mode: Press to select from the following home modes:Home,Dynamic.
Reset TV Setting: This clears all the TV settings for the television.
Software Upgrade: From time to time we may release new firmware to improve the running
of the television (available to download). This menu lets you upgrade that software onto the
television. Further details of how to do this will be issued with the firmware. Contact the
helpline or refer to the ‘product support’ section of the website.
Load Default Database: Import the default satellites and channel, so that the user can watch
programs directly.