Lenco DVT-220 - Manual (Page 13)

12
3. Press “c/d” button to select “AUTO
SEARCH” and press the “ENTER” button
to enter. Press “e/f” button to select
“YES” or “NO”.
4. Press “c/d” button to select “MANUAL
SEARCH” and press the “ENTER” button
to enter.
a. CHANNEL
Press “c/d” button to select “CHANNEL” and press the “e/f” button to select the different
channel .
b. COLOR SYSTEM
Press “c/d” button to select “COLOR
SYSTEM” and press the “e/f” button to
select the local color system .
c. SOUND SYSTEM
Press “c/d” button to select “SOUND
SYSTEM” and press the “e/f” button to
select the local sound system .
d. FINE TUNE
Press “c/d” button to select “FINE
TUNE” and press the “e/f” button to select the frequency which you want to fine tune .
e. SKIP
Press “c/d” button to select “SKIP” and press the “e/f”button to select skip the channel on
or off.
f. MANUAL SEARCH
Press “c/d” button to select “MANUAL SEARCH” and press the “e/f” button to adjust the
channel’s frequency .
5. Press “c/d” button to select “CHANNEL
EDIT” and press the “ENTER” button to
enter.
a. Press “c/d” button to select one
channel and press “RED” button to pitch
on. Press “c/d” button to select another
channel which you want to swap . Press
“ENTER” button to confirm.
b. Press “c/d” button to select one channel and press “GREEN” button to pitch on. Press
“c/d” button to select another channel which you want to insert . Press “ENTER” button to
confirm.
c. Press “c/d” button to select one channel and press “YELLOW” button to pitch on. Press
“c/d” button to select another channel which you want to copy. Press “ENTER” button to
confirm.
d. Press “c/d” button to select the channel which you want to delete and press “CYAN ”
button to pitch on. Press “ENTER” button to confirm.