Lenco IPD-4100 - Manual (Page 16)

15
Electrical Information
This Speaker Dock is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply
sockets it must be removed and replaced with an appropriate plug. If the plug becomes damaged
and/or needs to be replaced please follow the wiring instructions below.
The plug removed must be disposed of immediately. It must not be plugged into a supply socket as
this will be an electrical hazard. If the fuse needs to be replaced it must be of the same rating and
ASTA approved to BS1362. If the plug is changed, a fuse of the appropriate rating must be fitted
in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the fuse
cover must be refitted before the appliance can be used.
Wiring Instructions
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions given
below. In both cases ensure that the outer sheath of the cable is firmly held by the cable clamp.
2-Core Plug
WARNING! Do not connect either wire to the earth terminal.
This symbol indicates that this 2-core appliance is Class II and does not require an earth
connection.
The iPod Speaker Dock is guaranteed for twelve months from the date of original purchase. If any
defect due to faulty materials or workmanship, contact the Goodmans Helpline. Have your receipt
of purchase on hand.
The guarantee is subject to the following provisions:
• It is only valid within the boundaries of the country of purchase.
• The product must be correctly installed and operated in accordance with the instructions
contained in this User Guide.
• The Speaker Dock must be used solely for domestic purposes.
• The guarantee will be rendered invalid if the Speaker Dock is re-sold or has been damaged by
inexpert repair.
• The manufacturer disclaims any liability for incidental or consequential damages.