Lenco IPD-4100 - Manual (Page 8)

7
and then insert your iPod into the Adaptor.
DON’T FORGET! Your iPod will charge while docked when the Speaker Dock is in Standby
mode.
Press the STANDBY button.
Press the MODE button repeatedly until iPod is displayed on the LCD Display.
To start playback, press the PLAY/PAUSE button.
4. Connecting to External Devices
Your Speaker Dock can be connected to a number of external devices using the supplied 3.5 mm
Stereo cable (supplied) or an RCA cable (not supplied).
Switching On
1.To turn the Speaker Dock on, press the STANDBY button.
2.To turn the Speaker Dock off, press the STANDBY button again.
Adjusting the Volume
1.To increase the volume, rotate the VOLUME CONTROL clockwise.
2. To decrease the volume, rotate the VOLUME CONTROL anti-clockwise.
3. You can also press the MUTE button to turn the sound off. To turn the sound back on, press the
MUTE button again, or rotate the VOLUME CONTROL clockwise.
Preset equaliser
The range of the sound can be adjusted to suit the different types of music that you are listening to,
by changing the preset equaliser settings. The available settings are: