Lenco IPD-4300 - Manual (Page 6)

- Do not subject the unit to excessive force, shock, dust or extreme
temperature.
- Do not tamper the internal components of the unit.
- Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
- Keep your unit away from heating appliances and sources of electrical
noise such as fluorescent lamps or motors.
Care and Maintenance
Specifications
Power Supply
Power Adaptor:
Power consumption(main unit):
Battery for Remote Control
Audio Output Power
Input------AC 230 V~50Hz
Output----DC 10.5 V1700 mA
<18W
DC3V--- UM-4(AAA)typex2
2 x 5W
11
THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE
SET ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
If at any time in the future you should need to dispose of this
product please note that: Waste electrical products should not be
disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling
advice. (Waste Electrical and Electronic Equipment Directive)
10
Note:
Music from the iPhone can also be played in docking compartment. Once
iPhone is placed in docking compartment the iPhone screen will display the
following message:
This accessory is not made to work with iPhone
Would you like to turn on Airplane Mode to reduce audio interference?
You will not be able to make or receive calls.
- The above message will disappear from the iPhone screen after few
seconds. The iPhone is still able to receive incoming calls while inserted in
docking compartment.
- The iPhone music selection can be operated by the remote control.
YES NO
Listening To An External Audio Source
1.Press the Standby button to turn on the unit and the Standby LED
indicator turns off.
2.Connect an audio cable with 3.5mm stereo plug from an auxiliary audio
device to the AUX jack of the unit.
Note : Once the stereo plug is inserted into the AUX jack, the unit will switch
to auxiliary input mode automatically.
3.Turn on the external auxiliary audio device.
4.The volume can now be controlled through the unit. Operate all other
functions on the external device as usual.
Note :Press the Standby button to turn off the unit when you finish
listening. Don't forget to switch off the power of the external audio
device as well.
Eng Eng