Operation instructions – Dixon ZTR 5022 User Manual
Page 24
OPERATION INSTRUCTIONS
DECK ROLLERS:
60" Deck
Purpose:
The spring loaded deck rollers located at the front corners of the 60" mower deck
are designed as an aid to limit turf scalping when mowing on uneven ground.
Height:
Normal height settings as installed at the factory allows each roller to ride slightly
above the turf. This setting should prove ideal under most mowing conditions.
Adjustment:
Some mowing applications may require lowering of each front roller. To lower the
roller, remove the pin, spring, washers and spacer P/N 9789 from the top of roller
bracket tube. Remove roller bracket from tube. Slide spacer P/N 9789 on roller
bracket shaft and reassemble using washer, spring and pin at the top.
Lubrication:
The use of a penetrating oil or light grease on the roller bracket shafts will keep
roller moving freely.
Page 22