Dixon ZTR 5022 - Manual (Page 36)

CARE AND MAINTENANCE
6. Drive machine with both levers in top speed position. If one side now drives slightly faster than the
other adjust forward speed bolt in to contact stop sooner.
If levers are now uneven at top speed, loosen control lever mounting nut. Rotate lever to be even
with other side and tighten nut.
FORWARD TRAVEL SPEED ADJUSTMENT:
1. Drive machine on a smooth, level surface with both levers in top speed position.
2. If one side drives slightly faster than the other, adjust forward speed bolt in to contact stop sooner.
If levers are now uneven at top speed, loosen control lever mounting nut. Rotate lever to be even
with other side and tighten nut.
Page 34