Dixon ZTR 5022 - Manual (Page 27)

CARE AND MAINTENANCE
ENGINE TO MOWER DECK BELT:
42' and 50" P/N 6111
60" P/N 6938
The engine to mower deck drive belts are automatically held in proper tension by springs
which push the deck assembly forward and do not require any additional adjustment to
be made.
MOWER DECK SERPENTINE BELT:
42" P/N 6109
50" P/N 1300
60" P/N 6939
Refer to illustration for adjustment procedure.
NOTE: Belt deflection or movement should be approximately 1/4" when measured
at mid-point between pulleys.
Periodically inspect both belt and idler systems.
Page 25