Lenco MDV-24 - Manual (Page 12)

-11-
BASIC OPERATION
A-B REPEAT
In play status, press A-B REP button to realize the specific section repeat, that is, press this
button once at the beginning of the section (A), and press it again at the end of the section ( B),
this player will automatically return to A and starts to repeat playing the section from A to B.
Press the button again to exit.
TITLE
If the played DVD disc contains a directory column, press the Title button to take out the items
contained in this disc. Use the direction buttons to move the cursor to select the items you want
to play, or directly use the number button to select.
LOUDNESS
Press Loud button to set loudness on or off. When set loudness on, it can strength low sound
signal.
SOUND FIELD
In play status, press DSP button, you can select different sound field effect: Live, Pop, Dance, Jazz and
Classic.
PAL/NTSC
Press the P/N button to switch TV system output from one of the following: PAL, MULTI, NTSC.
STOP
In play mode, press the Stop button, the TV screen will return to the startup screen, press
Play/Enter button, the player will begin to play where it left off. If you successively press
Stop button twice and then press Play/Enter button, the disc will be played from the
beginning.
PAUSE
In play status, press Pause button, the player will pause, and press it again or press
Play/Enter button once to continue playing.
MENU
Pressing Menu button on the remote control opens or closes the PBC menu.
Note: 1). It will go into the Root menu when playing DVD discs.
2). Older discs or some copies don ’t support this function.