Lenco MDV-8 - Manual (Page 9)

Connection
7
Connecting the Speakers
P la c e t he Spe a k e rs
For the best result, please arrange the two speakers
as shown in the following picture:
Align the speakers vertically at the ear level and at a
horizontally angle of 45 degrees to the
primary listening area.
1. Position of the unit and the TV set.
2. Left speaker
3. Right speaker
4. Position to enjoy sound and video
C on ne c t t he Spe a k e rs
1.Please make sure, that the power is turned off and is not connected to the power outlet.
2.Press down the thumb levers and insert fully each tip of the wire into the connector. Then
release the thumb levers to lock the wire in place.
3.Please pay attention that the color of the wire correspondent to the color of the thumb levers on
the speaker and on the player itself.
N o te s :
To prevent damage to circuits, do not short-circuit the positive and negative speaker output
jacks.
Make sure the exposed tips of each speaker wire are separated to the distance that they can
not touch each other after they are inserted into the connectors.
Do not connect any other speakers or devices that are not included with this system.