Lenco MES-204 User Manual
Page 19
EN - 18
Audio Setup
* Digital out
SPDIF/PCM
Choose this setting, if your DVD player is connected to a 2-channel digital stereo amplifier.
When playing a disc recorded with Dolby Digital and MPEG audio formats, audio signal
will be modulated into a 2-channel PCM signal and it will be output from the Coaxial
Output jack.
SPDIF/RAW
Choose this setting, if your DVD player is connected to a power amplifier with a coaxial
cable. When playing a disc recorded with Dolby Digital and MPEG audio formats, the
corresponding digital signals will be output from the Coaxial Output jack.
OFF
When digital output is not in use, it is recommended to turn “OFF” the digital output
setting for the purpose on minimizing circuit interference.
*
Downmix
Lo/Ro: Stereo audio signal output
Lt/Rt: left and right soundtrack audio output
Custom Setup