Lenco SCD-2000 BT - Manual (Page 13)

13
3. Go to the Bluetooth® menu on the external device and click on "Lenco". The
devices will now establish a connection. Depending on the external device,
you may have to give Lenco permission to automatically connect to the
external device. To increase user-friendliness, Lenco advises to allow
establishing an automatic connection.
4. Go to the music player on the external device and export your favourite music
to the Lenco boombox.
Basic Operation
Basic Features
Power on/off the device, press the Power button (13, 24) to turn the device on or off.
The device is equipped with an ECO mode to save energy. The ECO mode enables
the device to automatically power itself down when it isn’t being used for 5 minutes.
Adjust the speaker volume, press the volume buttons (8, 35) to adjust the volume.
Mute the speakers, press the mute button (28) to mute the sound.
Select the input source, press the de source button (3, 29) to select the input source,
the options are: Radio, CD, USB, SD card, AUX and Bluetooth®.
Radio mode
This device has an AM/FM radio with a telescopic antenna for receiving radio signals.
If you want to listen to the radio, first fully extend the telescopic antenna (21). If the
signal is weak, adjust the position of the antenna to find the best reception. Contact
your local service provider for a frequency list of the radio stations that can be
received in your area.