Lenco Sportcam-500 - Manual (Page 4)

3
Introduction of Local LCD Status
When the Camera starts up, LCD will show the following information:
1. Photo Mode
2. Video Mode (by default)
3. Wi-Fi Icon (it appears upon the start-up)
4. TF Card Icon (it appears upon loading)
5. Resolution Icon:
Under the photo mode, HI means 10 Million Pixels (3648x2736); under the video mode, it means
Full HD videos (1920x1080,30fps);
Under the photo mode, LO means 0.3 Million Pixels (640x480); under the video mode, it means
720P videos (1280x720, 30fps);
Under the photo mode, HILO means 3 Million Pixels (2048x1536)/ 5 Million Pixels
（2592x1944）
/ 8 Million Pixels （3264x2448）;under the video mode can HILO appear, indicating 720P videos
(1280x720, 60fps).
6. Silent Mode: When the Camera is under the Silent Mode, it will appear; the Silent Mode is not
enabled by default;
7. Photo Counter: When the number of photos exceeds 999, it will only reveal 999;
8. Video Timer: It will merely show hours and minutes;
9. Power Icon: It will indicate the current power status.
Note:
1. Above icons will change according to your Camera’s status. Operating Mode Diagram
2. Photo mode, the default 5 M and 8 M. If need to change pixel, please enter the menu
Settings to select it. When the mode scroll one cycle, the set of pixels will be restored to default
pixels.